Nobody has an aftermarket tune or shops tune I can take a look at to see what they are doing for better towing power and exactly in what areas??? Thanks for any help!!!
Type: Posts; User: frankg
Nobody has an aftermarket tune or shops tune I can take a look at to see what they are doing for better towing power and exactly in what areas??? Thanks for any help!!!
UPDATE I did get these injectors to work> I bought the plug adapters and shortened the fuel rail mounts to make them fit. These injectors work great for my engine. The car has run 10.80@126mph on...
here is my Tahoe tune. Thanks
I have a 2002 Tahoe 1500 with 5.3 auto that I just use to tow my boat. Was wondering if anyone has a good tune I could look at to try to make more power for pulling my boat. Or possibly some advice...
Ok thank you
Is it possible to convert my friends ctz file type tune to a hpt tune?? Thanks
Which one would be easier the air injection or egr circuit to set this up?? Thanks
Had some guys on another website tell me I could use the air injection pump control circuit or the egr pwm output?? What do you guys think???
Yeah that would work but I'm running a dual fan setup and will be using both of those outputs already. Thanks for the help tho!
Trying to get an idea of where to get a ground signal from my 411 Pcm to run the dummy temp light in my 69 Camaro Lsx swap?? Any ideas would help Thanks
Just got those injectors in today and they are not going to work. They are the shorter style and have the wrong plug. So what will be my other choice for an injector?? Need to have the ls1 plug and...
trying to play with my hp tuners pro for the first time. j ust tried to view someones file on here and an open config box popped up and said it could not read file?? I was just trying to view it but...
Thanks a lot
I don't have the engine or wiring harness hooked up yet so I don't have a tune yet. It's just a stock 411 ecm I bought for now
I'd rather just run a steady 58 no vacumn. Thank you!
Ok thanks. So just set my fuel reg to 58 psi? Do I have to use the vacuum port or can I just run a set 58 psi? I have a return style reg from fast
I'm ordering these Ac delco injectors for my car so I'm in need of the injector calibration data if someone could supply it. Thanks
What fuel psi should these injectors be run at? I'll be doing a speed density tune and will probably run the car in open loop. So where would be the best spot to locate the wideband o2 sensor?? Is...
These have the ev1 plug correct? And they are the proper length for the victor Jr fuel rails? Thanks for the help! Pretty cheap on Amazon for $25 each #217-3410 Ac delco same as #12609749
They say 36 lb is that going to be enough fuel?? Thanks for the help.
Does the data sheet come with them?
...
Need help picking injectors that will have have flow data for calibration. Car is a 69 Camaro that will have around 650 crank hp. It's a 418 cube Lsx engine with efi victor Jr intake and edelbrock...