Think I got it figured out. Would I be correct in going under "list", then entering the data -14.700 at .5, then 60.300 at 4.5. Then clean it up taking -14.700 down to .0 and 60.300 up to 5.0
Type: Posts; User: Foose04
Think I got it figured out. Would I be correct in going under "list", then entering the data -14.700 at .5, then 60.300 at 4.5. Then clean it up taking -14.700 down to .0 and 60.300 up to 5.0
This shouldn't be hard, but having trouble. I'd like to log exhaust pressure with this AEM 5v sensor (30-2131-75). I have the voltage table, but not sure on the next steps within EIO input.
In the...
Yeah same page on that. If I input a higher stoich will it run leaner during close loop?
Hey guys, is there any way to run leaner then 14.7 in closed loop to aid in fuel mileage? Mine actually seems to run more around 14.2-14.4 and I know it's hurting mileage. This is on a 2004 gmc with...
I got my 80's to idle like stock, running them at 58psi base pressure and have 14.8-15.3 a/f's. However I am running e85 and it did take some tweaking.
More info on the truck:
http://www.performancetrucks.net/forums/showthread.php?t=465591
Hey guys, I was wondering if someone could look at this log and tell me why it's spraying past my 5950rpm cutoff. It seems to keep spraying on and off at 6300.
Setup:
Stock 4.8L w/ls6...
After a lot of reading, I still need some help.
Setup:
2004 GMC 4.8, 5speed
Ls6 Cam/Springs
MP70/.81 A/R
Deka 80lb's, 40psi fuel pressure
Walbro 255HP and Kenny Bell Boost a pump, 8an lines...
After some searches, I found I need to download a beta? Where I get it or can someone please send it to [email protected]
I have electice fans and use the Blackbear harness, pins 42 and 33, but...