What is HPT looking for in the OBD2 connector?
CANH
CANL
12V
Ground
Anything else?
Thank you in advance.
Type: Posts; User: jcmg8
What is HPT looking for in the OBD2 connector?
CANH
CANL
12V
Ground
Anything else?
Thank you in advance.
Not a answer for your hardware, in the AEM 30-0300 canbus threads there is one person running dual WB on the canbus inputs. I have been able (for comparison) to run the 30-0333 with canbus and MVPI...
this is where I selected the 30-0300 (Dr. Mike flashed)
http://i526.photobucket.com/albums/cc350/jcmal_62/AEM%2030-0300/canbus.jpg
According to the specifications the 30-0300 draws peak 3amps
Sure, can do editing if needed, but prefer a keyboard/mouse given the option. I guess I use the t100 as a fancy way to record in the same way once done with MVPI. The cupholder mount keeps it from...
yes. I micro usb adapter to the MVPI. Log only, then transfer to a bigger screen machine for review.
Have you considered the AEM 30-0333 wideband? It's new and will drop the WB on the canbus, no need to backdoor the signal.
Here are some threads:...
FWIW, t100 in tablet mode, generic cupholder mount
http://i526.photobucket.com/albums/cc350/jcmal_62/AEM%2030-0300/IMG_0461.jpg
https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcSFwHURR0LXmLKN9mcHq03DV4eKLndECuz9GhIlZc33gs0HtmWl
or have a look at this for the "eye chart effect"
Food for thought here. While having a smooth response is desirable, at the cost of added latency it is debatable IMO. While I'm not a calibrator by any means, I do know being able to see...
Here are examples showing the smoothing. One log is 3.0.47, the second is 3.1.129 (with smoothing). MVPI1 is AEM ANA (AEM 30-0300 analog), MVPI2 is AEM 100PSIg(psi) For reference, EQ(lambda) is the...
BMotorsports, thank you for the information. I have used the AFX, no complaints in performance. I recently did some research and picked up a AEM 30-0300. While I respect having a accurate meter, I...
Following Ed's instruction - working now. Thank you!
FWIW, here is a vid - shows the two WB channels interacting. Please let me know if I'm setting it up incorrect.
https://youtu.be/IiiJ5wv1ilk
schpenxel, thank you for the offer. If I can make some time in the next couple days, I get it resolved or have log file looking for help.
I would like to understand the MVPI process /channel...
more confusion. The canbus WB is on ECU 7e7, not mvpi - in channel add, there is not right click, it comes up as WB EQ Ratio 1 (SAE) in the channel, and works perfect. then add channel, > user...
I'm challenged in getting two WB to plot. I have read in this thread that V3 will average the two WB readings - yes, I can confirm this. It will average the wideband coming in over the canbus with...
This works perfect. HPT scanner tracks identical to the AEM display, almost too easy to set-up. Simple as clicking "WB EQ RATIO 1 (SAE)" in the channel selector.
Thank you Dr. Mike for the...
FYI .. another way to interface AEM to HPT being investigated
Yes, here is a clip from the manual:
The serial datastream is suitable for output to third party devices such as data loggers, PCs, or reflashed ECUs. The X-Series UEGO serial datastream is...
I looked at the serial port. The options are for Innovate and PLX. I'm running a AEM set for Lambda output. Do I use an either of these or do you need to set one up for AEM?
Ha. USB/Serial wideband input is supported in 2.25 scanner. Time to schedule the next project.
well. That is one reason I picked it up. I thought I had read that we could use the serial/usb data stream. Turns out, I misread that post and it currently does not. Perhaps in one of the updates....
Is there a schedule for implementation of serial/usb wideband input? I recently picked up a AEM 30-0300 - would like to use the serial/usb instead of the analog.
Thanks for the feedback. I'm currently running a NGK AFx which I'd like to use on other vehicles. I wanted to try one with the lsu4.9 and serial port data stream. I'll likely order in a few days.