Seemed to work just sending the files 1 at a time
Type: Posts; User: Mikehunt
Seemed to work just sending the files 1 at a time
I did and it did the same thing when I replied back. I will try just emailing 1 file at a time and see if it works
I emailed xxx
Hi I have tried to email support@hptuner and bill and just get delivery notice failures. I have tried to different email accounts and have the same problem
Mike
I am trying to licenece a 2011,2012 and 2013 3500 truck and I get a error message for invalid VIN/OS
Hi I am tuning a couple of fleet truck and the customer would like the tow haul for the trans to be on all of the time. How can I copy the tow table to the stock table. It is on 2011-2012 2500 and...
What kind of vehicle are you working on? Some have a lean cruise table from the factory that you can turn on and use
You should be able to just reset the ethonal content if it is less than 10% in the fuel but the ECM is showing higher, i have seen this many times. If it shows less than 10% ethonal in the ECM but...
Just goto replace and reprogram and type in the vin number I have done it many times before
Find someone with a tech 2 and TIS to web and he could do it for free
Thanks
Is a Tohoe and Silverado in the same model group licence. I have unlimited silverado licence and am looking at doing a Tahoe and wonder if I will need to buy credits
If you post your tune it will help so people can look at it
It wont let me is says my tune is 4mb and the limit is 3.81 PM me you email and I can send it to you
Hi I am try to increase the speed limiter on a 2011 2500HD with a 6L. I have changed the settings under speedo and limiter but it doesn't change anything. Has anybody changed the limits on these
Has anybody changed the speed limiter on a 2011 2500HD with a 6.0L
Are we able to tune 2011 and 2012 gas trucks the supported list only shows up to 2010
Have you tried reflashing it with the licence you already have? My understanding is you can reprogram a ECM as many times as you want it should matter is the dealer programmed over it, the licence is...
I am looking to programmed out an EGR on a 2005 5.7 hemi is the beta software able to do this
I have put the data in the calculator but i don't see where it goes in this ECM. It is different than the newer ones
I am swapping the injectors in my 2000 C/K truck with a 7.4L engine. What do i need to change in my tune besides the injector flow rate the stock injectors are 19.4lbs/ H and the new ones are...
Here is my stock tune and my current tune. the injectors I put in are GM part number 25313185 and the specs i could find on there are lbs/H 23.3 cc/min 244.9 grams 176.1 43.5 psi
I am swapping the injectors in my 2000 C/K truck with a 7.4L engine. What do i need to change in my tune besides the injector flow rate the stock injectors are 19.4lbs/ H and the new ones are...
Has anybody have any experience with tuning a duramax so it has an exhaust brake
Can you program out certain DTC's on the ford like you can on the GM's On the GM's the is boxes to check for which codes are enable on the ford list the is none, do you just set the code to no error...