A friend of mine recently go an 18 Camaro with a cam installed. Texas speed stage 3. We had a problem with it showing a check engine light for P0011 (intake Camshaft Timing- Over-Advanced Bank 1)...
Type: Posts; User: blackz151
A friend of mine recently go an 18 Camaro with a cam installed. Texas speed stage 3. We had a problem with it showing a check engine light for P0011 (intake Camshaft Timing- Over-Advanced Bank 1)...
The rest of it is stock for now injectors and manifold tb. As soon as the fast gets back from being ported I have that injectors and TB ready to go in then its off for a real tune.
Thank you on...
I have an 07 c6 427 stroked motor in it. It has been back on the road for 7-8 months now. I have messed with the tune here and there to get it decent till I get the rest of my parts and then have it...
I am having a problem with my AC on my 07 c6. I just have a quick question. On the VCM Scanner where is the AC pressure taken from? Is that the high side?
Thanks!
I see what you are talking about I did not notice that. I know I dont have rear 02 but that wouldnt cause it
Once again I spoke with out trying some things out. I added some more timing to the table and now the bucking is almost gone! I added a little more air and raised the idle to 1100 and it runs great. ...
We just took the car around the block and its has some low speed bucking. Is that because the air tables are 2 high or something else is causing that problem?
I took the advice of "codes" and I put my stock map in and tuned off of that instead of my old file and wow what a difference it made. I am still having a few issues but I wanted to post the file to...
Makes sense. No holes in the blade. Stock TB and Stock Intake. Right now I'm just looking for closed loop mode. I want to get the car up and running so I can break the clutch in. The car is pretty...
Thank you for the help. I was messing around with it and it seems that anything under 16 it does not like it won't even stay running. I will try to bump the timming up and see if that will help.
...
Ok scratch everything I posted above. I was in the way wrong ball park.
I finally got it tuned to idle sounds and runs pretty good. When you hit the throttle it comes back does not hunt or...
Just rebuilt my c6 z51 and today is day one of tune day for me. I am slowly starting to understand what is going on. I used big mikes guide to setting the idle and I still cant seem to get it right....
Great! Thank you!
I just got my tuner today but have been reading up on everything for weeks. Tomorrow I will be tuning my 07 c6 that we just put in a 427 ls3 ls7s cam Prc heads ect ect. I've read everything I can...