I did remove vehicle info and reconnected. restarted l
the laptop while everything was plugged in and wideband on, this worked but next time it was back to not working. Crazy thing is that is has...
Type: Posts; User: Speed39
I did remove vehicle info and reconnected. restarted l
the laptop while everything was plugged in and wideband on, this worked but next time it was back to not working. Crazy thing is that is has...
I am having this same problem.
Mine has always worked, now does not. I have deleted the channel and readded several times with zero luck. The channel shows up until i hit record, then it go away....
Just getting started tuning this. I just noticed the voltages and thought i would ask. This is my first go around with the GM tunes. have dome quite a bit with
dodge tunes and GM is a little...
Helping a friend out on his L83 swop 70 c10.
While getting everything set up i notice in the log that the TB voltage is around 3.41 volts not running and at idle. the pedal voltage is around...
I know this is an old thread, but I am tuning a friend's L83 swop 70 c10. Going with full SD and full open loop.How do I adjust the fueling and can't seem to find ECT TPS MAX. I have only tuned...
Following. I am new to gm tuning as well. Dodge I am proficient in but gen 5 gm is a different animal. Helping a friend on his l83 c10 swop. Got it tostart and run . He is an hour away but will go...
Yep 400 or 727 is the way to go for strip only. This isn't my daily but drive when I can. It a pretty hard hitting 5.7 and shifting the m6 at 7200 is pretty much 50/50.
I was thinking it should not...
Looking into doing either the 8hp or nag1 swop into a 2016 5.7 m6 challenger project. What harness do I need .
Thanks.
clear adaptives, let it run
Nope pulls hard all the way. I have a Holley sniper sheet metal intake on it right now, long tube headers , catless mids, ect. Doing cam, heads, 90mm TB this winter. Should make some good power then...
Also no advantages to E85 unless your running some big Compression and can't get your kr down with pump 93 without taking timing out.
Cam for CR, or CR for cam your running. These engines like a lot...
I do not tune off of trims. Tune off your wide band. The trims will always try to get ya to stoich 14.7.
Tune for what it wants.
Tune your running now from hp tuners. Not too sure on all the pids but for sure, map, rpm, lt st fueling, timing. Just most guys in the know will want to see your tune and a log to be able to help ya...
post the tune and a data log .
It's all top secret. Like your going to put some out of business. SMH. I do my own thing. If it works Woo-hoo if not I know what doesn't. Anyone need a hand, more than one way to tune as well pm me
Help please
04 cad cts 3.6. thinking ecu went bad, I purchased a used one, licensed both the original, and the replacement.
Flashed entire read from original to the replacement, car started but no...
Help please :pray:
04 cad cts 3.6. thinking ecu went bad, I purchased a used one, licensed both the original, and the replacement.
Flashed entire read from original to the replacement, car started...
Could someone explain the first paragraph in this. Correct me if I'm wrong. Replacement ECU installed, tune open for original ecu? https://www.hptuners.com/help/vcm_editor_flash_menu_change_vin.htm
Does both of the software numbers need to match on each of the ecu. Hardware and software OS. on each one, original and replacement. Hardware OS is same number but software OS Is not?
OK thanks
GM Tool?
I am having issues with my 04 cts. Problem is a no start and key will not turn back to lock and no gauges but power is on. If I leave key in start position, jump the starter relay, she starts and...
yes it does, get a tad fat in a few spots. it seems to like it but has not been on a dyno to really see power numbers. I will do a 100% tune after the winter upgrades.
Funny thing . Went back and...
i see that you changed the maf VS PERIOD , why is that ? these cars do not have a maf sensor
also can i see a log of a couple pulls ?
I didn't touch it. What ever is there was in stock tune . I can get ya a couple pulls but don't have a good one with the cam set to lock pin