Adjusting the screw wont mess with the tune, however the correct way to set the throttle angle on a cable car is to perform an iac reset.
put key in ON position
Unplug IAC
Turn key off
Now...
Type: Posts; User: jpliss
Adjusting the screw wont mess with the tune, however the correct way to set the throttle angle on a cable car is to perform an iac reset.
put key in ON position
Unplug IAC
Turn key off
Now...
I was reading some info as im going to upgrade to MPVI3 interface.
There is a note that the 99 - 03 7.3 is only supported by the MPVI2 interface.
Will there be support for this platform on the...
5FDP thank you for all the help.
Just as anyone should say always look at the basics. I had not looked at the basics like I should have.
Turns out that the rail pressure was under 20 psi and...
Ahh good point il try reinstalling the MAF
I have verified power at all 8 injectors.
I was focused on the 400 to 1200 to get it running. I will revisit the timing table and remove all - timing...
OK so maybe someone can help me with this.
I have a 5.3 retrofitted in a 56 nomad.
Injectors are DW 18U-01-0042-8 42 LBS injectors.
It has a comp cams Muther Thumper cam in it. ( NOt my...
OK so maybe someone can help me with this.
I have a 5.3 retrofitted in a 56 nomad.
Injectors are DW 18U-01-0042-8 42 LBS injectors.
It has a comp cams Muther Thumper cam in it. ( NOt my...
Somethign else to look at in the future. If you use the ignition wire from a factory style harness, ensure it is powered during crank. If not you may need to jumper the ignition switch for the power...
My recommendation would be to go read and update your knowledge on narrow band sensors and what they do.
Narrow band sensors only switch from high to low of the intended target which is Stoich or...
The tuningschool stuff is pretty nice. I have used their items twice to either get better at or learn
Oh guru of the hemi, can you learn me ?
Im still learning the hemi stuff so im no expert, however I would love to see your turbo setup.
I was wondering the same thing, is this covered in the latest 3.4?
I am wanting to know on a 2006 RAM 1500 is the trans available now? 545rfe trans too
Sorry for some reason I lost track of this.
It appears the 2006 trans support is not there yet.
Yes it is a 545RFE.
Sorry for the late reply
The best way to run windows on a mac from my experience is to boot camp your mac and then do a dual boot.
You keep both worlds on the same machine.
My MAC pro worked like a dream running...
Im in Akron. Why moving?
I will do that. I was talking to Jay at the Super Summit show and he thought it was supported.
I am trying to read the trans from an 06 Dodge Ram 1500.
I see 4 choices of trans controllers.
Since this is not an 8 speed that is not it.
I tried the ngs352, ngs353 and the ngs4
the 52...
This is actually a little late but wanted to post anyway.
2 Weeks ago Summit Racing had their super Summit event at Summit Raceway park
While at the event I noticed the HPTuners tent.
Of...
The last that I saw, the other brand would not work either.
You have an autoprom, you might be able to use RTT or tunercat if there is an xdf for your vehicle.
The home course is pretty darn good. I learned a lot and their support helped me when I had an issue that was stumping me.
I do agree with gmtech16450yz, sorry but the customer is not always right!
As a matter of fact most of my customers are wrong, it is the reason they come to me. They accept they are wrong and...
I had a mac pro.
Did boot camp ran windows 7 never an issue with tuning.
No fuel, been there done that.
I charged him for every hour I worked on that car.
I don't have anything to add but am extremely interested in this.
I am doing an 06 5.7 stroker to 392 with a blower.
I am newer to the dodge stuff and would like to learn more. Anything you...