Search:

Type: Posts; User: mechanicboy

Page 1 of 7 1 2 3 4

Search: Search took 0.00 seconds.

  1. Bump for the updates, I'm looking for the same.

    Bump for the updates, I'm looking for the same.
  2. It ended up being that the CMD was -12 when my...

    It ended up being that the CMD was -12 when my friend at the smog shop said it's supposed to be within 5 either way. we adjusted it to -2 and it runs great now! I have no idea why the timing shows...
  3. How do you perform the relearn? I'm having a...

    How do you perform the relearn?

    I'm having a P0300 code on a 1996 5.7 in a c1500 I'm working on. It came to me with P0171, P0300, P0420 and P0430 codes. Found the elbo leaking badly for the PCV...
  4. Replies
    0
    Views
    530

    Tuning Torque converter slip

    I have a 2013 Fusion 2.0 Ecoboost AWD. I'm having low load converter slip around 2k rpm at normal to light acceleration. I can feel a slight shudder and I started my log early today and sure enough...
  5. I had to re-scale my torque tables too to get...

    I had to re-scale my torque tables too to get more boost (21lbs) but I found that I wasn't making more power because the turbo was just making more heat. After doing a lot of research and found that...
  6. Replies
    31
    Views
    5,669

    Here's the thing, how much boost can it make/take...

    Here's the thing, how much boost can it make/take and how much boost will it still make power are two different things. The stock turbo will make more boost than the engine can handle for power on 87...
  7. 3 years later and this still hasn't been solved?...

    3 years later and this still hasn't been solved? I'm running into the same issue
  8. Did you use a factory valve body or use an...

    Did you use a factory valve body or use an aftermarket rebuilt one?

    Both sonnex and transgo claim their kits fix the problem. I know the transgo kit goes to a larger pressure regulator and both...
  9. Did you figure this out?

    Did you figure this out?
  10. So I tried something new today. In order to get...

    So I tried something new today. In order to get around whatever limiter I don't have access to, I lowered the engine torque calculations and recalculated the inverse by 10%. This allowed me to go...
  11. I still haven't figured this out in case anyone...

    I still haven't figured this out in case anyone else has ideas. I'm pretty dang sure I'm missing tables to adjust. I will be submitting what I believe I'm missing to support. For now, I've turned my...
  12. Submit what's missing to support. That's what I'm...

    Submit what's missing to support. That's what I'm going to do soon for tuning my 13' Fusion 2.0 AWD. I've found quiet a few tables that appear to be missing unless they just aren't available for my...
  13. Didn't help. I added timing in this revision and...

    Didn't help. I added timing in this revision and my boost went down it seems. Torque values seem similar which leads me to think that because it's making more torque with the increased timing it's...
  14. I was comparing files and noticed that under...

    I was comparing files and noticed that under Torque Model>Monitoring>MAP Maximum that my numbers in the high load cells where much lower than your stock read numbers were I had those raised in...
  15. [QUOTE=Stevekreger;687933] Still not seeing...

    Still not seeing the boost I'm expecting. Feels strong out of the hole, even squeals the tires slightly, but doesn't built or hold boost like I'd expect.
  16. Still not going above 1.9 load really. I'm...

    Still not going above 1.9 load really. I'm definitely missing tables that you have adjusted as I found a stock file you shared in another thread. I'm attached the new tune file and log. I can feel...
  17. I had the last two columns over 400lbs in the...

    I had the last two columns over 400lbs in the first 5 revisions or so and all it did was increase the delta between the torque requested and actual. I have adjusted more tables since then so I could...
  18. Thank you, I appreciate any help you can provide....

    Thank you, I appreciate any help you can provide. I want to be able to know how to control boost first before I mess much with timing and VCT. I plan to build a low, close or at stock boost tune...
  19. I tried increasing the Closed WG DC from 75 to 85...

    I tried increasing the Closed WG DC from 75 to 85 and if anything it seemed to go backwards. I'm stumped. I'm beginning to wonder if my tune is missing some parameters because I can't find some that...
  20. Go ahead and delete this. I posted it in the...

    Go ahead and delete this. I posted it in the correct section.
  21. 2013 Fusion 2.0 Ecoboost trouble raising boost

    I'm a little stumped. Everywhere I read that I should be getting 22-24 lbs of boost. I'm on an e30 right now. I've done a lot of reading, tried many suggestions and would like some help. I thought...
  22. 2013 Fusion 2.0 Ecoboost trouble raising boost

    I'm a little stumped. Everywhere I read that I should be getting 22-24 lbs of boost. I'm on an e30 right now. I've done a lot of reading, tried many suggestions and would like some help. I thought...
  23. Replies
    6
    Views
    3,000

    That would suck. I hope this is not true.

    That would suck. I hope this is not true.
  24. Replies
    94
    Views
    51,155

    So I'm a little confused here. On a gen2...

    So I'm a little confused here.

    On a gen2 coyote, it sounds like there's two ways to tune.

    One, disable MP 0-13 and only tune the MP where the runners are open. Change the HW removed to open and...
  25. Replies
    8
    Views
    5,172

    Did they ever get resolved? I had something...

    Did they ever get resolved? I had something similar happen today. A vehicle I've written many times came back for some tune changes and now it suddenly says Unlicensed Vehicle. Under License...
Results 1 to 25 of 167
Page 1 of 7 1 2 3 4