I have a customer who just called me. He put a 2017 hellcat engine in an old duster. He used the mopar plug and play harness and ecu. It starts and goes into limp mode. the directions for the...
Type: Posts; User: kbturbo
I have a customer who just called me. He put a 2017 hellcat engine in an old duster. He used the mopar plug and play harness and ecu. It starts and goes into limp mode. the directions for the...
This is my first time needed to tune a 2015 challenger. Ive read the stick on the 2015 through 2017's. My customer is an elderly man who takes care of his sick wife and can't go without the car for...
I believe I found the culprit. I had to tweak the misfire tables. even though it wasn't throwing a misfire code, it was still affecting the stabilitrak
Ive dialed in the cold start, and idle very well. if I shut it off and restart it 10 minutes later, it fires right up but almost dies coming back down. so far its caught itself every time and then...
as the title states, I get a random stabilitrac light at idle and very low rpms after the cam and longtube install. I have the misfire test turned off. there is no check engine light. has anyone...
I'm trying to shut off dod on a 2011 Silverado. I already liscensed it for 2 credits but its asking me to use a third credit on the gm fscm a controller. Is that right? does this need 3 credits?
I'm trying to update my software and am having trouble figuring out how with the new website. Where can I find the link to update my software?
working on a 2010 Camaro with a stage 4vvt cam and an automatic trans. I'm working on the startup and idle on the car. ive gotten it nailed down decent except for it shutting off after you blip the...
I got a car towed in that was tuned somewhere else but still doesn't run right. I cant find the main VE table I wanted to disable the maf to start tuning the ve table but all ve tables under "main...
I cant seem to find where to buy credits on the new site
I contemplated doing that, I just wasn't sure if it would cause any issues by turning off the test completely. Thanks so much for your reply
the car is an auto with an edelbrock e force with the tune from edelbrock. I need to retune it because the car has no cats. I'm getting the p0121 code. I haven't run into this much at all but with...
I have a customer that just swapped a 4l80 in his 2000 Camaro. the car was previously tuned and I don't have the stock file. I found a 4l80 Camaro tune in the repository. Can I start with a stock...
Im working on a 99 Silverado with a small cam, 4th gen intake, long tubes, and basic boltons. when it's in gear with my foot on the brake, at a stop sign, the truck switches back and forth between...
that's the first thing I would like to check. when I go to read the tune, it starts reading for about 10 seconds and then fails. it will stay at .2% read then fail. Ive tried reading each...
I'm working on an old street rod that someone has swapped a 2011 Tahoe drivetrain into. The scanner hooks up fine, when I try to read the tune in vcm suite, it will start to read for about 10-15...
I'm working on a street rod with a 5.3 and auto out of a 2011 Tahoe. Someone did the complete swap and now it needs tuned. the trans is shifting terrible and after a datalog, I noticed that the...
i have a customer with a 2006 Dakota with a 3.7 and an auto. am I able to tune the transmission on that with the latest version?
I got the dreaded avalanche back today 2012 turbo avalanche with a tooley stage 2. I have the startup and idle nailed down pretty well except when going from park to reverse or drive. it will drop...
Thank you guys. That made a huge difference. the one thing I forgot about was when the a/c is on, it idles around 900. when you go from park to reverse, it drops to 500 or sometimes even stalls. ...
I figured I would start a new thread on this 12 turbo avalanche because I only have one issue with it now. cts-v map, 80lb injectors, speed density tune with an on 3 single turbo kit. With the much...
I have a very good start on it thanks to Chris and all his help. The one thing I'm fighting is hot start. It will light off for half a second and shut down. If I touch the pedal it will stay...
Here is where I'm a little lost when I change the manifold absolute pressure axis on the vve table, the table gets all distorted with negative numbers and such. How do I begin to build a table...
I think I will try setting it up without the 2 bar os just to make sure everything is ok with the build and to see that it atleast runs. Time to dive in and try it I guess. thanks for all your help...
Can I use the cts-v map sensor and still use the standard os?