Search:

to the top

Here is a screen shot of what happends when I type 'map' in channel selector on one laptop to another. both have 3.6 and it only shows 3 bar on one of them....
...

ive narrowed the problem down to this: There is no 3 bar sensor in my Channel selector to select and log its in my graphs but not in my channel selection that is why its not logging. On my old laptop...

it logs the regular map sensor fine but wont go over 105 kpa. If I could get the sensor number or pid number I could create a function/expression for it. This Verison of hptuners does not have the...

Yes sir it is the newest software. Also I've removed it from the channel with no luck... Should I be using the default pid for the 3 bar provided by HP tuners? Or should I be creating a user defined?...

For the life of me I cant get my 3bar map to log on my new laptop. Ive found the standard 3 bar parameter and it wont log it nothing show up when the car is on. Ive also tried to create a custom pid...

a shop did the cam and called me for a tune. Apparently the factory sprocket came off the cam and the dowel fell in the pan so they put a bigger cam in it. Factory pushrods and valve springs because...

Got a new car and having issues tuning it once it was cammed, keep getting no response from the tps after the car runs for a few seconds its drive by cable and we can barely get the car to idle....

For some reason the car leaves fine and in the middle of WOT at high rpm we have a side going real lean almost shutting off the injectors (one Bank). Both banks are fine at 25-35 Pulse width at WOT...

For some reason the car leaves fine and in the middle of WOT at high rpm we have a side going real lean almost shutting off the injectors (one Bank). Both banks are fine at 25-35 Pulse width at WOT...

Have a car that is throwing this error ive never seen before when trying to edit a tune (not yet licensed) it says i will be unable to edit this file please email support. Here is the Suite info...

The car has a P0103 MAf code and an p0200 injector circuit. I know its because of the LS2 style maf. When i unplug it it wants to run better but the IATs are reading -38 deg. All sensors are working...

The car has a P0103 MAf code and an p0200 injector circuit. I know its because of the LS2 style maf. When i unplug it it wants to run better but the IATs are reading -38 deg. All sensors are working...

I'm sure the car will run good one second then go full limp mode I know it's got to be a sensor of some sort

It just stays pegged lean all the way at idle/driving no matter what i do in PE and Open loop adding fuel it wont throw the fuel its commanding at it. Anyone?

I have a buddy who brought me a car that has been beating my ass. Its an ls2 with heads/ cam with an ls1 wiring harness in a 95 camaro. I know its a combo of the MAF/ DTCs. The MAF is LS2 Style and...

I have a buddy who brought me a car that has been beating my ass. Its an ls2 with heads/ cam with an ls1 wiring harness in a 95 camaro. I know its a combo of the MAF/ DTCs. The MAF is LS2 Style and...

Im working on a car that is giving me a hard time falling into SD. The car has an LS2 Maf with the IAT integrated. For some reason I think that it is not falling into SD and its wanting to read the...

Gear changed it runs much better but still getting a map code

we got a car that the guy brought for a cam swap and was sold a 1x cam gear for an ls2 so we put it on and of course its throwing a p0341 and p0343. we have pictures and sure enough it the factory...

keith, can you send me a download for 2.25 and i will try it. thanks

i understand. what other way is there to edit the pcm id?

I am trying to tune an 02 Trans Am Black Bird 1 of 8 that GMMG/ YearOne Built and I believe the bastards there locked the pcm because of the '380hp' package that they claim on this Special Edition....

I think it is the TRQ MGMT when i was logging it, it would have a % next to it when the truck was physically hesitating. Also i was logging the fuel pressure with a mechanical gauge and it doesn't...

I changed the Plugs and checked over the wires. Truck still gets knock and hesitation while cruising. Any help would be appreciated. Attached is the log file