Search:

Can someone please share a link. Someone did before but it is no longer here. Odd

I read Greg Banish' book advance tuning and he likes to tune MAF first so I figured i'd give it a shot.

Can someone please provide me with a link or in depth explanation how to MAF Only tune my LQ4 6.0. I have found countless ways to tune after VE but I want to tackle MAF first. Any Help?

Mike

Here is an article on a bunch of different widebands tested. Make your own decision. I personally use the LC-1.

http://www.fordmuscle.com/archives/2007/06/WidebandShootout/

It's my brother in laws car we share hp tuners so i'm just trying to help him out. sorry for that LSJ 2.0 supercharged NOT turbo.

Thanks

I have my wideband all setup but I don't have HP Pro so I was wondering what wire you guys use or what pin on the ECU you use to read the wideband on HP Tuners. Or even a wiring schematic for a 2006...

My issues are pretty much having someone check my work and ensure me that i'm tuning VE and MAF properly.

I am hoping there's someone that would be willing to sacrifice a few hours of their time to help a fellow enthusiast in NH, or MA to help me get started in tuning my Camaro and show me the ways. ...

zero out the airflow vs. frequency table for the maf?

Ok I am not logging with MAF as I was informed not to. The AFR Error i'm using is through the pids I had to setup to work with my wideband. I will zero out my MAF table and try again.

zero out the MAF table completely? I'll recheck the grounds on the lc-1. When i'm driving sometimes it will hover around 12.0 to 13.0 and fluctuate a bit up to 15's. only in certain tps/rpm areas...

Do all of the files i've posted look right for what i'm trying to do?

Are you suggesting that I have a mechanical problem? I just replaced my spark plugs because they were so fouled out. I think...

I believe that my maf is disabled properly. I did about 12 things or so to disable it. The MAF is still plugged in while datalogging.

Most of the time my AFR is flashing 7.4 on my LC-1 and from...

The .hst .cfg files are in an earlier response to this thread.

I input the injector data first and now i'm working on the VE then going to MAF.

When I tried VE Logging with the arrow pointing right last time I would receive no cell hits what so ever on the table until I got into 100 map. Was it working properly? I am also running eye...

maybe viewing some of the files i'm working with and logging might help. Any thoughts as to why I cant come even remotely close to tuning this car in VE? I have done over 18 logs and trials and i'm...

I drove it for about 20 minutes and got no cell hits what so ever until I was way up in TPS and almost any rpm. Normally before this time. The histogram would show the yellow cell moving around...

I am tuning my VE right now and when i'm logging the data on the AFR error histogram I get no cell hits until I get into higher rpm's and higher throttle positioins. The car is driving much much...