I am not (really) arguing with GM's programmers or you. I know nothing about GM's programming. Again, I am relating my sense experience after changng the setting using HPTuners. I'm sure there is...
Type: Posts; User: kgb
I am not (really) arguing with GM's programmers or you. I know nothing about GM's programming. Again, I am relating my sense experience after changng the setting using HPTuners. I'm sure there is...
I am relating to you my direct experience and you are in effect telling me I am imagining what I am feeling (SOTP), hearing (pinging), and measuring (decreased gas mileage), based on your mental...
With all respect, I don't care about the logic. I'm only relating what I experienced in my C6 when I change the setting: i.e. pinging and much better throttle response. I also notice when I set it to...
LS2 Tuning Guide
Where exactly do I find this guide?
Is there instruction anywhere on this site on how to do spark tuning? I have search and search.... :eek:
When I lower the PE Enable Delay RPM value (default is 5000) on my C6/M6 2005 it becomes much more responsive. In fact when I've dropped it to about 3500 in the past, I began noticing audible...
Got it working. Thanks for the help!
[QUOTE=4evervette;162336]yes u can ..one of the forum member did this config ..[/QUOT
Well, if it is possible, how do I get it to work? I uploaded this file a few months back. Can't get it to...
Is this possible for the 2005 corvette? How do I do it?
The only PIDs for knock retard that are red in the Histograms are Knock Retard, and Total Knock Retard. Knock Retard for Cyl 1 thru 8 are...
I believe this is a "2005 c6" thing. The auto trans should have the same table.
Every was stock except these values when I made the adjustment.
I increase the values by 80% in the "Retard vs % Torque Reduction" table and the torque increased quite noticeably. Torque now comes up early in the throttle throughout the entire rpm band like you...
I have an 05 and installed the Beta 2.23 a couple of weeks ago. I made the "throttle plate opening" adjustment but ended up restoring it back to stock. IMO there are other (perhaps a combination of)...
Changing the setting does not have much of an effect on the fuel trims that I noticed. You may have to tweak your timing though.
I have improvment in power delivery and throttle response in...
OK. I've been driving around with this change over the weekend and am convinced it is responsible for the improvement I'm experiencing. The engine feels as though it revs more effortlessly; this is...
I have noticed this discrepancy too in Cylinder Volume setting between the '05 and [06 & 07] vettes. So today, after stumbling on to this post last night, I changed the value to the 'correct'...
Thank you, sir.
I have 2.2.0; 2.2.2 is now available. Or am I mistaken about all of this.
Has anybody installed the upgrade yet? Any useful new features for the Vette?
This link may help.
http://forums.corvetteforum.com/showthread.php?t=1941725&highlight=fuse
I'm in the same boat. I have an 05 as well and am involved in the tuning process. :eek:
RWTD,
Couldn't you use the injector flow rate adjustment to achieve the desire PE as well? If so, what's the difference vs using the MAF table?
Thanks!
I reviewed that lg file. Can the ls2 safely handle 28 degrees at full throttle? I show knock retard at stock timing levels.
I don't mean to take this thread off topic.
I have not done any logging, but the throttle response and tip-in are more immediate with the tables zero'd. I did recently restore the stock Launch Spark settings. It affects how smoothly you can...
This is interesting. Was your vehicle at normal operating temperature?
Why is HP Tuners (or is it GM) leading us to believe these settings have no bearing on performance? Both settings sort of lead you to believe only cold start performance is being affected. This...