Any plans for dodge Ram support? I traded my chev in on an 09 ram, because lets face it chevy is falling waaaayyy behind the times! but the tuning sucks :(
Type: Posts; User: cpelton
Any plans for dodge Ram support? I traded my chev in on an 09 ram, because lets face it chevy is falling waaaayyy behind the times! but the tuning sucks :(
Awesome.. thanks man, huge help! I'll let you know how it goes.
i'm still stuck on this histogram, if anyone has one it would be a huge help.
anyone?
Well didn't go quite as planned. I couldn't get the maf vs voltage histogram to work at all. Does anyone have a working one they can share?
great, thanks for the help it makes sence now. Will be doing some tuning tonight, I'll report back.
Cheers
i'll try that, I thought i had the latest version.
Do you recommend leaving the base fuel table stock? and only tuning the MAF?
Also, any ford scanner configs and histrograms would be a great help. The few in the repository did not work for me.
been having problems with the scanner, it will not allow me to add any more pids to the table. I get a windows error and the program wants to crash everytime I add one. This only happens with the...
anyone? here's the trucks stock file. Need to be pointed in the right direction.
Hi, this is my first attempt with a ford. Its an 07, 5.4L 3 valve F150. Need some help in setting up a base tune for the first time we fire this thing up. What do I need to change so the ecu won't...
thanks for the help so far, but the truck still dies once warm at idle and in gear.
ok done, didnt seem to help at all.
across the whole table for in gear?
So the truck was recently in the shop for a month for a new transmission and new rearend. Now the truck will not idle in gear at all once warmed up. I have to always drive with 2 feet to keep the...
I managed to get rid of my KR issues, thanks RussK! and I think I have my tune about right, except for one problem that drives me nuts:
When I punch it, closed loop, afr drops to 11.2-12.0 which...
Russ, used your tune, took a few wot runs to get it running decently in OL.
Here is the last log I made and the updated tune, any suggestions?
ok so I got the tcc chattering fixed, i bumped the duty cycle min/max tables to 90 and 100. I also bumped my tcc lockup in 4th to 50mph and that seemed to cure it, sounds like it was engaging at too...
also the 1-2 shift is a little firm for my liking at low throttle settings, but when i get on it the shifts are perfect, how would I go about softening it up a bit with the line pressures? and I...
Hey russ, sorry i havent been on here in quite some time, i will try that tune. I just installed a new tranny with HD-2 with one washer in the accumulator and a 2500 stall TC any changes I should...
I think i'm going to try a 2 bar tune, I bought the sensor a while ago anyways I think I will be able to get more accurate fueling this way. Is tuning for 2 bar simple? just log ve - wideband afr %...
its set to enter PE at 85kpa or 50% throttle, it shouldn't be exiting.
also here is the MAF config I am using.
Well I keep getting KR under part throttle acceleration around 2400-2800 rpm, I have pulled a lot of timing from my high octane table but im still getting 3-4 degrees of KR right in the middle. ...
you can also command closed loop fueling 'off' in the controls window in the scanner, right above 'reset fuel trims' in your fuel+spark controls tab.
Thats what I do when I tune, turn off closed...