So this is the same for lamda? The 10-11 Camaro V6 tables are lambda, not AFR. So would this be correct?
Wideband O2 Sensor (LC-2)
0 Volts= .65 Lambda
5 Volts= 1.65 Lambda
Volts Max = 5...
Type: Posts; User: kid
So this is the same for lamda? The 10-11 Camaro V6 tables are lambda, not AFR. So would this be correct?
Wideband O2 Sensor (LC-2)
0 Volts= .65 Lambda
5 Volts= 1.65 Lambda
Volts Max = 5...
For some reason my scanner is reading false outputs from several sensors. Lambda B1 commanded reads around 1, while B2 reads around 250. It shows my oil temp as -40 and my timing advance as -64 with...
I won't continue to argue my comment vs your comment, because we obviously both feel we were in the right. We will argree to disagree.
I understand your comment about Hondas and Toyotas. However,...
[QUOTE=Bill@HPTuners;223134]Majority sold doesn't always = majority getting mods or tuning. My mom had a gen 4 Camaro V6, did she mod or tune it...um no.
[QUOTE]
I felt your comment was...
Glad to see the Camaro5 guys coming on here and showing intrest. Be careful, though. Bill get's tired of customers asking for this support, and already locked the last thread. Hopefully Chris is a...
That's fine if they don't want to "put their name on a limited tune." However, it will be not the only product it will work on. All it is is an add-on to a full program. No, it will not make sense to...
You could see small amounts of carbon coming out of the crack.
It was just a matter of adjusting the exhaust so it wouldn't touch anywhere. The vibration from the body contact would reverb all the way back to the motor and get picked up by the sensors as knock....
Apparently it was false knock. As the exhaust heated up, it started contacting the body on acceleration. The sensors read this as knock, and went a full -10 degrees to compensate.
A lot of threads I have read say to just pull that much timing from the effected cell. I would think that would defeat the purpose, because you want to keep that timing.
Mines going to the dyno...
Here's the tune.
It seems to stumble at about 20% throttle on a pretty regular basis.
Sorry, I thought I attached the config. I'll add that when I get home.
I'm getting spotty KR under light load, and the car bucks a little. It's all mid range in the chart, and I don't want to just pull timing from the table seeing as it's only a few cells that show it....
Check out http://www.cyberpowerpc.com/
They build my gaming laptop for $800. You can get a good utility laptop a bit cheaper. And you get all name brand components, without having to spend hours...
umrj-I logged both air pressure and absolute pressure because I wasn't sure which to use. It's the Kpa that isn't changing.
Frost- I have to run a new vacuum line for my heater controls, so while...
In my latest log, my MAP stayed at 92.0 the entire run. Is this a sensor issue, or something in cfg?
First off I'm new to all of this. I got my injectors tuned in, and the car runs great. I'm trying to do some fine tuning and I'm running into an issue with my histograms. It seems every histogram I...
With a bunch of help from some members on here, I finally got the WS6 on the road. Here's a vid of my first hard pull.
http://www.youtube.com/watch?v=3rueSelT6Tc
Seeing as the total suite won't be available any time soon(or at all) is there a way to at least write to the ECM for simple changes? I'm talking tire/gear changes, or even torque management disable.
Yeah, I did a twist and tape just to check it was the only issue. I'll cut, solder, and shrink all of them tomorrow.
Well get that man a cigar! Edg wins the O2 mystery game. I started by pulling plug wires, no change withany of them. I forgot how hard that was to judge on a V8. Started pulling injector wires, no...
Yes, I did a total tear down of the drivetrain that started about 8 months ago. I have no leaks upstream that I can hear. I've welded most of the exhaust. I have a slight leak AFTER the O2 in the...
Yeah, I just put a meter on it. I'm getting power to black as well as the white heater feeds.
I'm just getting started with tuning, but I'm having an issue that's keeping me from getting the basics done. For some reason my B1 O2 isn't oscillating, and it's reading off the charts. I swapped in...
That's why I bought one, and that's why I'm patiently waiting for the update:pray: