It's the twenty-first century, old man. Nothing wrong with asking for better documentation on software nor asking for help when someone is genuinely lost. Some people exhaust their efforts and...
Type: Posts; User: fls350z
It's the twenty-first century, old man. Nothing wrong with asking for better documentation on software nor asking for help when someone is genuinely lost. Some people exhaust their efforts and...
Hey all, I've been trying to troubleshoot a P2111 code on a 2013 Ford Fusion. I was going to check voltages of the TPS via the scanner but I only have the basic % options in the Channel list. I've...
Can I sneak into this thread and see if I can get some knowledge and wisdom out of y'all? I have an LS3 swapped 350z that has been giving me throttle problems for months. P060D code. If I'm tame on...
So what are my chances of being able to modify these throttle areas successfully on my own? Or would I be better off purchasing a Sierra pedal?
I know there is a manual option under Trans in...
I have it working now, website was just slow earlier. I can make sense of what I'm looking at, loosely, but does this show only manufacturer or dealership updates/calibrations? In order to see the...
That webpage doesn't load anything after inputting data into either field. Also, when my CAN networks were "merged" on the old module, I used to get a P2127 code, with them separated I get the P060D....
Interesting. Yeah I can't speak specifically because I ordered them online both from companies/individuals that were aware I had done a swap and was using a 350z pedal...not to say something wasn't...
First one was out of an '08 Corvette and, again, thing worked fine for a good thousand+ miles. I ended up having to use a different CAN module (this occurred a month after the first pedal issues...
Should have added I have used two different ECMs, same problem.
Following this one because I've been chasing a similar problem on an LS3-swapped '03 350z. Should I start my own thread?
P060D code. I'm thinking it's a short somewhere because I didn't used to...
Update. Double checked vacuum from PCV and cold air intake, cleaned it up and my LTFT started coming down a good amount. Is this significant?
Couldn't upload the 10MB log so I created a Drive link....
Ahh I gotcha. Sounds like another "good idea, terrible execution" thing.
I'm not following. Alcohol? Are you saying the ECM changes from standard gasoline settings to some alcohol settings?
Okay guys so the wideband sensor should get here Monday. I picked up a AEM 30-0334 like BigTuner recommended. Should I pop it in before one of the O2 sensors or in the X chamber (at 9 or 3 o'clock...
I'd like to eventually install PCV system with a catch can.
Cluster values were confirmed.
Vacuum is capped off. Valve covers are very similar to this. https://granatellimotorsports.com/images/F198645618.jpg
Picked one up, should arrive Monday. I'm really curios to see what AFR this thing is running. It smells stupid rich.
Gotcha. I'm good to leave the l/h side capped off right? Thanks for the...
Also, thank you guys for the wisdom, I sincerely do appreciate it. I am looking into a wideband setup because I'm gonna want to pursue tuning this car more seriously. Any recommendations on a sensor...
Oh, nah I don't think so but how can I check?
Oh. It's fixed orifice, the little L-shaped thing on the passenger side valve cover. Does it pull air or push it from inside the crankcase? I...
Right now I'm hunting down a leak potentially in the crankcase ventilation hose. I squeeze it off, O2s drop. I release it, O2s spike. I'm going to look really carefully at my cold-air intake setup,...
Thanks for the response, the P2127 code is just the gas pedal sometimes not "turning on" or working at startup, just have to cycle the key and it's fine. The position sensor is probably going bad but...
Hey y'all,
So I swapped a BluePrint crate engine into my 2003 350z about a year ago and it's been running rich since I first started it up (which apparently defaulted to an open loop because one...