Are these numbers for the 868 or 811 injectors? I am running the 868s in my 6.0L
Type: Posts; User: Tazmo65
Are these numbers for the 868 or 811 injectors? I am running the 868s in my 6.0L
The reason I think it is getting flaky is if I am running in SD with steady throttle I see reading go from. 95 to 1.05 for no apparent reason and other times it will read steady as it should.
No you have to change out the cable also to the tune of $100 for the cable and sensor. I understand that you get a little more resolution with the 4.9. I have been getting strange readings with my...
I have a innovate mtx wideband currently installed and I think the sensor is going south on me. The gauge was shipped with a 4.2 sensor and would like to know if it worth it to upgrade to a 4.9...
So after some more research it appears that in order for misfire detection to work you can not have any other dtc's present as I did because I was running in sd with maf failed. I then renabled the...
Could someone tell me what channels need to be logged while scanning for misfire on 2002 ls1? I have a miss that I can feel and hear at light throttle but I get no dtc's. Not knowing what to scan, I...
The high lambda readings should have read 1.02 and 1.06.
The iat started at 77 and ended at 95* I have the pcm set to open loop with the high rpm disable set to 0. Is that the proper way to set for maf only?
I am trying to get my maf dialed in. I start my run at around .8 to 1 lambda and running nice. But after a combination of city and highway driving I am around 1.2 to 1.6 with some surging. All this...
It was 2 credits for me!
At least I can stop looking for it lol.
Is real time tuning available in version 3?
where in the editor could I find to put the program in open loop, and disable the MAF?
Where does the firmware update com from? Internet?
Figured it out.
The other day I was going to change some pids in the primary table display but I could not get it to open. I messed with it a bit and it finally opened. But now I can't get it open at all. I...
Cool thanks
Thanks for the response. I did increase the decimals. I am running a 411 pcm if that changes anything.
I am trying to copy and paste injector offset data into into my tune from a spreadsheet i recieved with my new injectors but every time I go to paste the numbers they end up changing. I think it is...
That's kind of what I thought. I eventually want to hook up my cruise control up, so I think I will need it for that also.
How can I do a case relearn if I don't have the brake switch hooked up? This is a 6.0, T56 swap. I tried but HP Tuners told me the car was moving!
Anybody?
As a rule, where should my injector duty cycle be at idle with a tr228 cam, green giant injectors, in an ls2? I have my my rafs pretty close and idle afr is around 14:7. The cells around idle in my...
Sorry for bringing back an old thread but you said that you had tables for the Green Giant injectors. Curious if you could tell me where you found them. Thanks
Thanks Jeff.