2 bar OS: WOT timing is "off the table"

How come the timing tables on the 2 bar OS are the same as stock? When I'm over about 10lbs boost, my g/cyl is higher than the tables max 1.36 g/cyl. So does it just use the timing values from the 1.36 line after the ACTUAL g/cyl climbs beyond the table?

It just uses the value in the last column

some PCM's you can edit that axis to what you would like.

Perfect, thanks.

http://www.hptuners.com/forum/showth...over-1-36G-Cyl

Thanks for the link Carl! There's always a way around the problems. lol