Printable View
I just installed new Bosch 72lb injectors with all the proper data, flashed the new info to the PCM, started up, and now when I scan no LTFT STFT data. Anybody have a clue what I did wrong? Thanks for your help! Scan attached.
Also showing
[PCM] P0200 - Injector Control Circuit (Pending) (Old) (Current) (Immature)
Well I found out what my issues were. After I took a laser temp gauge to the exhaust manifolds I found one only reading 225F where all the others were close to 500F. After some simple test I found this on the injector pig tale for that cylinder. Bent pin.
http://i638.photobucket.com/albums/u...IMAG4282-1.jpg
Second issue of not logging STFT LTFT, well I just had to turn on the "fuel learn" on the scanner and I got it working.