For fuel pressure regulators that are seen the 4 and 6 cylinders;
they have a thread on the bottom but the line is just held in via a retainer.
Is there any adapter for the return line end to an AN fitting?
Printable View
For fuel pressure regulators that are seen the 4 and 6 cylinders;
they have a thread on the bottom but the line is just held in via a retainer.
Is there any adapter for the return line end to an AN fitting?
This what you are looking for?
http://www.jegs.com/i/JEGS+Performan...03100/10002/-1
Why not get an aftermarket FPR?
maybe post a picture of what your trying to do. i ran an lines on a 2.2 ecotec swap and i used the stock hard line off the regulator and used a -6an to 5/16 compression, worked like a charm.
do you mean this?
Russell - 3/8" SAE quick-disconnect male to 3/8" SAE quick-disconnect female with 1/8? NPT female side port - PN: 640730
http://t0.gstatic.com/images?q=tbn:A...IAaXjz1XHPV19p
No, I was looking for a connector that connects to the stock fuel pressure regulator.
This is just for aesthetics for a customer, probably just going to use -6AN - 5/16" compression fitting.