hey i was wondering if anyone knew if the 15 5.0 had the same vct no fly zone as the 11-14 car?I also noticed that optimum power mode is disabled in the mapped points config. thanks
Printable View
hey i was wondering if anyone knew if the 15 5.0 had the same vct no fly zone as the 11-14 car?I also noticed that optimum power mode is disabled in the mapped points config. thanks
Just did a compare and 2015 and 2014 have the same Overlap Border.
cool. the 2015 i read didnt show the overlap order for some reason.
mine doesn't have overlap border table in it and I haven't seen a 2015 read that did have it...have viewed 5 so far, 2 autos (one being mine) and 3 manual cars
I'll look into this tomorrow.
My bad guys. I didn't notice that it was grayed out. When I opened just the 15 tune it's not there. Neither is Max Phasing Limit for Intake. Sorry for misinformation.
The No Fly Zone is handled differently in the 15s. I'll work on adding the parameters for that .
Any more info on this? I noticed I'm limited to about 20 degrees of movement on the intake cams. I see in an SCT file I'm playing with that they have some limitations listed under VCT scalars. Just curious on this.