Can someone explain why when I set the "Fuel" "Closed loop enable" "ECT vs IAT" to max and set "MAF fail high" to 0, I still get info from the MAF while logging the VE as I got different numbers after I unplugged the MAF. :confused:
Printable View
Can someone explain why when I set the "Fuel" "Closed loop enable" "ECT vs IAT" to max and set "MAF fail high" to 0, I still get info from the MAF while logging the VE as I got different numbers after I unplugged the MAF. :confused:
I've followed this guide for tuning before, some of it is useless if you arent running a cam but to get it into sd it works.
Also you can never log anything maf related in the table display if you are trying to run in sd.
http://michigansnowmobiler.com/hptun...ons%20rev2.pdf
Thanks for the link, I will check this out.