guys take a look at the race tune ive wrote really quick, mods in my truck is a LBZ CP3, PPE Boost Valve, Transgo shift kit, Suncoast Boost valve, and BD Low Stall Multi Disc converter
what do you think?
Printable View
guys take a look at the race tune ive wrote really quick, mods in my truck is a LBZ CP3, PPE Boost Valve, Transgo shift kit, Suncoast Boost valve, and BD Low Stall Multi Disc converter
what do you think?
ok tune 2 seems to run much better!
dynoed tune 2 today on a dyno jet 224 load cell 506hp and 965 ftlbs
Damn, sweet numbers! Is that what you dynoed with the final tune you posted?
yes with the final tune
Nice numbers...
Are you holding rail pressure with this tune? That is alot of pulse width with very little timing. If you got 506HP with this tune there is alot more to be had with some better tuning :drivin:
i was must been the lbz cp3, heres the last tune i made that ran way better before i traded the truck
Will this tune run fine with a 4" straight piped exhaust '04 LB7 with a stock LB7 CP3?
To much PW for a stock lb7 cp3 without lift pump 26 to 27 is about the maxQuote:
Originally Posted by nitrousgp
i ran this tune for a while. it makes pretty good power.. i played with maf tables a touch though