This will also work on a HPT custom OS as long as the "from" segment file matches the original OS. Just did it.
This will also work on a HPT custom OS as long as the "from" segment file matches the original OS. Just did it.
I'm trying to swap a 6.0l 4l80e to a 6.0l 4L60E, Same OS same year, using a 5.3l 4L60 program for the trans segment. When I look at the DTC's they don't transfer over even when I select the trans segment and the DTC and copy them over in the segment swap tool. The shift sol. the trans fluid, and the TCC, and other codes don't have the check box marked and it says No MIL Light? Am I doing something wrong or will everything work?
I tried playing with this segment swapper tonight with a couple files. I can perform the segment swap, but when I go to close the segment swap window the vcm editor software crashes. Any ideas?
Nevermind. It had to be a licensed file.
thanks for sharing!
Will I need to get hold of an ECU to copy from or are there files I can download?
Will a 4L80E segment work for the 4L85e?
Ive never done a segment swap before and would appreciate any help, where do I go to get a file to segment swap from? I am converting an 03 Silverado from a 4L60 to a 4L80. 12579405 OS
Found one
Question, how long does it take to hear back from HPT when you email them requesting 2.25 beta?
I just downloaded the 2.25BETA and cant find the the segment swapper!!??
Found it, Does it only light up as clickable when you are able to swap? And do you need a license on the compare file?
opened over 100 files from the tune repository looking for a matching OS. not having any luck at all. hope I didn't waste 2 credits on pcm that I cant use for a segment swap. need a 4l80e segment.
my OS ID= 12606960
would really appreciate the help I'm totally lost
I have the same OS ID. 12606960, and can't find a 4L80 file with the same OS to do the segment swap from. Help!!
when doing a segment swap do you need to license the compare file to do the swap to the file that is receiving it or you don't need to Cheers Bret@ultimatelsxtuning
with the T42 Tcm , is it true you can't do a segment swap etc 4L80E Into E38 PCM...
That's what I have heard. I'm using the 4L60 tune to run the 80. You can do it with two relays or switch a couple of wires in the trans plug. I will look for the diagram and post it. PCM of NC sells the relay harness if you don't want to switch the wires.