When setting up AFR in my PID, I noticed there was 3 listings. AFR ratio error,AFR command Hi res., and AFR command Lo res. Which if any of these 3 should I insert in my PID file in order to log AFR.
Printable View
When setting up AFR in my PID, I noticed there was 3 listings. AFR ratio error,AFR command Hi res., and AFR command Lo res. Which if any of these 3 should I insert in my PID file in order to log AFR.
AFR Error is different than AFR Commanded and none of these will tell you your actual AFR. You need to insert the EIO PID for your wide band to tell your AFR. Then you will need to log commanded AFR (either low or high res) to be able to have the AFR Error PID calculate the error. Go with low res.
I do not understand! Where do I find this (EIO) pid for my LM1:confused:
Do you have the Pro version?
YesQuote:
Originally Posted by 5_Liter_Eater
In your table right click in the EIO section and add your Wideband there.