yes it happens immediately. can you explain what the C ++ runtime is?
Printable View
It should have been one of the lower downloads - I think....
ill try that and give it another go. thanks guys
I am having a problem with the software tool to regenerate the equations on my 2014 LS3. I use the software to pull the equations form hptuners and create the LS2 VE table no problem. I then send the LS2 VE table to the Lo Altitude VE table with no issue. I am able to tweek the tablw just how i want it and then use the software tool to pull that adjusted table back in the software. I then recreate the equations and send it back to HPTuners. all seems well. However for kicks i zero out all the info in the software tool and repull in the new updated equations from hpt, i then create the ve table from those and that version of the VE table is all out of wack, huge spikes all over the place and nothing even close to what it should have been. Anyone else have this issue?
Can someone help me out real quick, My "VE Reversion Lo Altd" table references RPM an Throttle position not RPM and MAP. Tried using V4 but I can't get past loading the second VE table. Running a 2008 E38 with an LS7.
Searched through this whole thread found nothing. All the other E38 base tunes I have show the same thing for the "VE Reversion Lo Altd" table RPM/TPS.
I'm totally lost now :shrug:
download link not work
http://www.mediafire.com/file/kad7iu...mo5/EQ_VE5.zip Worked fine for me.
Im sorry if this has been covered, but I have not read the entire thread. Everytime I try to apply the data from the graph in the scanner, I am told that the histogram cannot be found. Any input?
it was a good read from page one 1 here i do see my question already being asked without prevail, here is some data regarding "couldn't find one equations window" the P12 GM ecu for colorado and hummers only have 5 ve maps and i have opened every other window and tried it, with no success moreover i can successfully get ve calculations on an oem 5.4 Triton also ls3 tune file. finally i am running ecm editor v4 and still no option to tinker with ve maps then previous versions of hence editor for this particular ecm. Attachment 86216