Printable View
hi guy
can you tell me what going wrong with this.. at 7:50 im at wot and my engine have a big hesiation.. i run with 94 octane this week.
my config is 3.1 pulley. siemmen 60's lbs, injen pflow, dual end plate. i know my iat 1 have a big bug..
thx for reply.
Do you have a wideband? And your fuel trims are terrible. You are adding 10% at WOT because everything else is so far off. And post your tune...there is no way you are at 89% IDC with 60's and that pulley.
no wideban at this time.. im working to grab it soon..
you entered a scaled IFR table then forget to use the voltage multiplier. who tuned this?
prolly like 8:1 afr right now lol
anyone think my maf is busted and fucked up the pcm.?
change you IFR voltage multiplier to 1.3, then retune your MAF and VE tables. Your problem is your injectors are set up wrong.
ok ill try it. i select entire line and put an 1,13 X that rigth?
yes
thx guy for your help. my VE error % historigram say Not supported. i search in hptuner forum but i cant find any info about that.. wich pids a need to put in for my historigram work. or if you know a thread related about this just link me to this. i didnt see it for lsj.. have nice summer. thx for your reply.
ve error wont work without a wideband, its a wideband error % based on the ve table