MPG gauge in scanner?

I have done a lot of searching, but with no luck. I wanted to know what I need to do to have a gauge that shows MPG.

Quote:

[SENS.20]/(([PID.6210]*0.132276)*[SENS.112]*[SENS.70]*8/(6175*(((([SENS.11]+[sens.10])/2)+273.15)/299.8167)))

this should get you MPG..and should compensate a little for fuel temperature a little bit..cause fuel weighs different amounts at different temperatures

seems to be accurate in my car...

basically its
[MPH]/(([Injector Flow Rate]*0.132276)*[InjectorPulse Width]*[RPM]*8/(6175*(((([IAT]+[ECT])/2)+273.15)/299.8167)))

with everything converted so that the units match appropriately

Also, when I am creating the new PID, what do I need to set the "sensor" and "units" at?

Sorry if I failed in my searches :(

Thanks in advance,

Kev D

Any ideas?

I would also like to know..?

please help if anyone has been able to get this working

would like to know that as well

Can any body help or point me in the right direction on this topic

1 Attachment(s)

This is the config I used months ago, but I never verified its accuracy.