"LS3" 3 bar map sensor 12592525 on gen III?

Quote:

---

Originally Posted by Throttle

i have held off on ordering a Map sensor because they said maybe!,But when the machine shop is done balancing and boring my block somethings gotta happen.

---

When was the last time you took a look.:chug:

What version of SW is this?
I'm at.2.24.392 and it's not in there.

2.24.581

Thanks man

well how come i have 2.24.584 and it still doesnt let me do anything other than stock???

Chris I see the minimum limit is adjusted for the regular OE operating system's. But can you also apply this to the custom operating systems? The Minimum limit is still 0kPa when you apply any of the custom OS's

its fixed works in custom OS now,with the ZR! 3bar MAP

I just did this. Didn't know all I had to do was update

Quote:

---

Originally Posted by ddavis08

I just did this. Didn't know all I had to do was update

---

So is the electrical connector on the zr1 compatible with the gen3 wire harness or would i need to rewire?

EDIT: I searched and realized that I need to get an adapter.

I have been trying this, and car won't start with ls3 map. It will with the ls1. Map is reading 3.8 with key on and 7 while cranking anyone help me out?