Coyote tune

Printable View

10-30-2023
Paul b

1 Attachment(s)

Coyote tune

Hi all, am in need of someone to look at this tune , mainly the cam side. I?m getting bank2 exhaust codes p0390,p0394. Engine has had OPG and lower sprocket from MMR fitted, and bank 2 exhaust cam phaser. Have been through tinning a couple of times, engine idles fine but has vibration at around 1200rpm up, oil pressure is good,all cam sensors have been replaced, engine has about 10k on it and is out of a 2017 GT mustang, have done kam reset and crank relearn with no success. All wiring has been checked, wiring harness is Ron Francis wiring and computer is factory with pats removed
Thanks
11-03-2023
veeefour

Bad timing, sorry.
11-12-2023
Paul b

Quote:

Originally Posted by veeefour

Bad timing, sorry.

in the tune or valve ?
11-12-2023
veeefour

Quote:

Originally Posted by Paul b

Hi all, am in need of someone to look at this tune , mainly the cam side. I?m getting bank2 exhaust codes p0390,p0394. Engine has had OPG and lower sprocket from MMR fitted, and bank 2 exhaust cam phaser. Have been through tinning a couple of times, engine idles fine but has vibration at around 1200rpm up, oil pressure is good,all cam sensors have been replaced, engine has about 10k on it and is out of a 2017 GT mustang, have done kam reset and crank relearn with no success. All wiring has been checked, wiring harness is Ron Francis wiring and computer is factory with pats removed
Thanks

Timing, chain assembled incorrectly. You did OPG's you did something wrong.