Printable View
setup is 5.3 twin 61mm turbos and 226/229 114 cam, 4l80e, 60lb sieman dekas. im fairly new to tuning but i have read the threads for a few weeks now but for the life of me i cant get the car started in the 3 bar os. the car starts and idles and drives, on a stock tune, but when i switch to 3 bar Nothing. i pulled a base tune from the repository, i've set the MAF 101, 102 103 to no mil still nothing:doh:
Attachment 47269
map sensor, check with OS upgraded to 3 bar via scanner what your map sensor is ready at key on engine off... are you getting any codes or emergency power?
i'll check that this evening and report back, last i checked i was getting a p0106 code but ill check again this eveningQuote:
Originally Posted by SultanHassanMasTuning
You need to set the MAF codes to fail on first error and set your MAF fail freq to 0 Hz to properly activate SD with HP Tuners. You want your MAF to fail instantly when keyed on and cranked the first time.
...and everything Sultan said about the MAP. That P0106 will need to be addressed.
Actually tried that a few times , maf codes Set to fail on first error and fail freq set to 0 still the same problem, i tried a few different settings as i had seen others on this forum set theres to no mil. But i will set it to first error and zero on maf fail this evening when i check the mapQuote:
Originally Posted by ElecTech
Is the VE even close to right? Did you copy/paste your 1 bar VE to the 3 bar?
Definitely set the codes to fail on first try.
With the 3bar tune, are you doing a write to entire or write to calibrate?
Yes, also tried it with 3bar ve, samething. I will set codes on first tryQuote:
Originally Posted by edcmat-l1
Write only for calibationsQuote:
Originally Posted by POWERZONE
I figured that.....Quote:
Originally Posted by lrj6
You need to do a "WRITE TO ENTIRE" to apply the custom OS(3bar).
After you change the OS then you can use the write to calibrate function.
Thats what i did. I did write entire first to change to.the 3bar custom 2000 os from the stock tune,, then did write only for changes that i made.Quote:
Originally Posted by POWERZONE
The car runs with that 226/229 camshaft and 60lb injectors on the stock tune perfectly?Quote:
Originally Posted by lrj6
Post the tune you saved as your "stock tune".
its starts, idles and drives and runs, i never said perfectly. But it starts when i switch it back to the stock tune. Plugs wires, are newQuote:
Originally Posted by POWERZONE
Ok, post the stock tune, the one it starts with.Quote:
Originally Posted by lrj6
Ok give me a fewQuote:
Originally Posted by POWERZONE
Trying to upload a pic but im on a phone, it looks to be 105kpa for map with key on engine off???
Its the old school block style, i got it off of ebay theres no part number on it
Attachment 47283
Attachment 47283
map is supposed to be a 3 bar older block style. bought off ebay it has no part num on it
Attachment 47284
codes p0748 p0405 p0102
All of your attachments are coming up as invalid.