Printable View
I see a lot of post about this but no solution. I'm having a issue where randomly the scanner stops logging/everything goes flat. See attached log from dyno this morning. I do not have dual monitors or anything like that and did not have this problem on 2.24 unless the DTC window was open. It was not open for this log.
what are the specs of your pc? windows version, ram, processor type & speed
I had this same problem, not sure what cause it but if i bring Task manager and give high priority to Scanner process it starts to work quite ok, did not tried to disassembly the program to see if there is a lak of optimalisation to work with cpu/memory or some kind bug in addressing in memory.
i had even Razer Blade laptop (Intel? Core™ i7–6700HQ Quad-Core Processor with Hyper-Threading 2.6GHz / 3.5GHz (Base/Turbo), 16GB dual-channel onboard memory (DDR4, 2133MHz) ) and had same issue too ROTFL.
this is why ill stay with 2.24 and wait until new program code will be fix for good.
best regards
Update your software, 3.0 is old and has been replaced with 3.2, we cannot troubleshoot bugs in old software.