Hi, Dr. Mike. Ifyou still have these available I am very interested! (May get 2)
I PM'd you. Please let me know ASAP!
Hi, Dr. Mike. Ifyou still have these available I am very interested! (May get 2)
I PM'd you. Please let me know ASAP!
Where are we at with this? Gen3 P59 Silverado needing a fix. I have done all the tricks and just want to get this channel working.
Calling Dr. Mike!
Sorry, all. Been dealing with some medical issues. I hope to be back to it, soon.
OK. Sorry again about the extended absence. I had multiple eye surgeries, on both eyes. They are letting me get back to work, now.
with a gen 3 truck i installed my x series 30-0334 and it reads an afr, when adding it to my channels on my mpvi3 scanner after re-polling for new pids i am not able to even receive that correct ?wb eq ratio 1 (sae)? as an available pid?
Gotta know when to give up guys.. Seems like vaporware.
Close... I had eye surgeries on both eyes, over the last year ( vitrectomies and cataract lenses ), . I am "mostly recovered". But, it is, still, difficult for me to do programming work. It is hard to explain. I can "see". But, it's just not right, unless I am looking directly at it.Quote:
Gotta know when to give up guys.. Seems like vaporware.
. The project is still technically, "open". But, it is, somewhat , superfluous, due to the changes in the MPVI3 licensing, that allows direct connection of the AEM widebands, via CANBus, without need of the "advanced features" option. The direct connection, like that, is, actually better than the J1850 interface, provided by the adapter box.
There are a few test units, out there. But, I have not been able to do firmware updates, since the eye issues.
If you are diabetic, TAKE CARE OF YOUR EYES !