2010-2012 Dodge RAM 6.7L Cummins 6.7L Now Supported!!!

HP Tuners is proud to announce full support for 2010-2012 Dodge Ram 6.7L Cummins vehicles in the latest VCM Suite 3.4.11.

Features include, but are not limited to:

• Full support of fuel system.
• Full control of fuel governing system including protection factors, RPM limits, and much more!
• Full Injection timing control with all compensators and limiters defined.
• Full fuel pressure control with all compensators.
• Comprehensive list of enhanced PIDs in VCM Scanner.

This includes all vehicles equipped with the following PCMs:

• CM2200

Please Note: Vehicles equipped with a CM2200 PCM requires the PCM to be patched. If the PCM has not been previously patched, the patch will be automatically applied during the first write.
Upon reading the PCM, you will be provided with a stock file.

http://www.hptuners.com/images/CM2200/CM2200-1.png
http://www.hptuners.com/images/CM2200/CM2200-2.png

Does it read the ecm or is it a virtual read?

You will be provided with a stock file.

I'm having an issue writing the calibration on a 2011 6.7 dodge that has rendered the truck useless until it's resolved. I e-mailed tech support but no response yet. Just wondering if anyone knows if tech support is available on weekends, or am I out of luck until monday?

Quote:

---

Originally Posted by EFI swap guy

I'm having an issue writing the calibration on a 2011 6.7 dodge that has rendered the truck useless until it's resolved. I e-mailed tech support but no response yet. Just wondering if anyone knows if tech support is available on weekends, or am I out of luck until monday?

---

What is the issue?

Does anyone have a base tune I can look at - I checked the repository and found none - the repository doesn't even have the 6.7L I6 DSL engine option as searchable...assuming because no one has uploaded their file yet.

I'm about ready to do some work on a 2012 Truck and wanted to mess around a little bit before the truck shows up. Could I look at a 5.9L I6 DSL file - would it be similar?

thanks,

Ken

Not similar

Is it safe to assume I can tune the transmission in an auto? How about control of CEL's? I dont want to tie my PCM to HPT unless it can do all the things the other brand can

Quote:

---

Originally Posted by Jenson

Is it safe to assume I can tune the transmission in an auto? How about control of CEL's? I dont want to tie my PCM to HPT unless it can do all the things the other brand can

---

You dont have to license or pay anything to read it out and take a look. Do that first.

Quote:

---

Originally Posted by Turbo_Mike

You dont have to license or pay anything to read it out and take a look. Do that first.

---

True, I always forget that!

Edit; you can't control any CEL codes? That seems like a no brainer to be included

Subscribing as I have a customer here interested in dealing with eliminating certain codes on his off road sand truck 2012 Dodge Diesel.

Where can the stock tune be found? Thanks!

By reading your ecm with the MPVI and tuning software

Tried to read Dodge RAM 2011 6.7 and it doesnt read it and after that car not start and pcm not read( How to resolve problem?

Resolved it by reprogramming ECU with WITECH 2.0