4 Attachment(s)
A580 Tuning is Here! EGS52/EGS53
HP Tuners is proud to announce READ & WRITE support for EGS52 & EGS53. These TCMs were used with the A580 5-speed transmission from 2005 to 2015.
This includes but is not limited to the following vehicles:
- 2006 - 2014 Chrysler 300/300C
- 2009 - 2014 Dodge Challenger
- 2006 - 2014 Dodge Charger
- 2011 - 2012 Dodge Durango (V6 models)
- 2005 - 2008 Dodge Magnum
- 2007 - 2011 Dodge Nitro (4.0L models only)
- 2006 - 2012 Jeep Grand Cherokee
- 2012 - 2015 Jeep Wrangler
After downloading the latest VCM Suite 3.0, you will be able to read and write to your EGS52/EGS53.
***NOTE: We will not support some outdated EGS53 operating systems (VCM Editor will update your TCM Operating System automatically to a newer/supported OS before tuning).***
IMPORTANT: Before tuning these TCMs, please make sure you update to the latest VCM Suite 3.0, discard any TCM reads created with older versions of the software, and RE-READ your vehicle. Prior versions of the software allowed for these TCMs to be read, however if you attempt to load any read that was created using an older version it may cause VCM Editor to crash.
After reading your vehicle, if you get a "Validate Checksum Failed" error, please email a VCM Suite Infolog and the .HPT file to support. For more information on this error please see this thread: Validate Checksum Failed. You will be unable to save or flash this file.
:cheers:
Attachment 53501Attachment 53502Attachment 53503Attachment 53504