Printable View
hi guys i just install my lc1 with gauge and i cant get it to stay steady it bounce all over place cruise from 14.7 to 21.0 and WOT it run from 14.7 to 12.2 and my hot ground i grounded it on the passenger head thanks in advanced btw im new here :hi:
This is kinda of an add on to your question. But whats acceptable for AFR to chagne on a WB? I noticed the AFR never stays stable either jumping around .5 point or more. Is that acceptable? I figure once AFR is dialed in more maybe this problem will resolve?
Quote:
Originally Posted by tsench
If you have not setup your LC-1 in the software provided by Innovative, now would be the time to do so.. You can slow down the wideband in the software to correct for this problem..
If you have setup the speed then you need to tune it.
:cheers:
..
so how do you slow down with the software i cant figure out with the softwareQuote:
Originally Posted by Google
Quote:
Originally Posted by tsench
See attached or the lc-1 manual from your start menu..
.
ok kool for a quick response ill check that out and see what happenQuote:
Originally Posted by Google
another question i dont have that option in my logworks 3
i install the program and this what igot LM programmers v3.22 and logworks3
nvm thanks i got it