stage 3 pcm n hptuners

the thing i want to know is,if you can enable the a/c through
hptuners. if thats the case i myself will be planning on switching my pcm to
a stg3 and let my tuner do his thing. if not i will be waiting for hptuners
or trifecta to enable the a/c. thank you for your time.

On Fri Feb 19th, 2010 11:01 AM EST Jay Payson wrote:

>I forwarded this to Bill the other day, and he replied last night. He
>was under the impression that we could read that processor now. Do you
>have HP Tuners, and have you tried reading that PCM? If so, can you
>please email
it
>us? You will probably need the latest beta to do so


Honestly, I do not know what GM did to disable the A/C. I am not sure if
you are able to turn it on with our software or not. Are you able to get me
a read of the PCM with the stage 3 from someone that has HP Tuners?

so do anyone have access to hptuners with the latest beta and read a stg3 pcm n see wats up?

Do you have the stg3 file? Ill look at it if you email it to me ;)

the thing is i dont have either =(

i was hoping some1 in here have both
to be looked at.

Ive been using the latest beta, if you have the stage III pcm and your in the kansas area id meet up with you to read it then upload it onto this forum?

He's in southern california. Mac, i'd look at your tune, but you would have to pay for the credits to do, better off having your guy pull the tune.

My cable is having issues anyways.

you don't have to use credits to read or look at the tune. just to change it or write it.

alsoalso if its in the scanners vcm controls, you don't need credits either.

Quote:

---

Originally Posted by 06_LSJ

He's in southern california. Mac, i'd look at your tune, but you would have to pay for the credits to do, better off having your guy pull the tune.

My cable is having issues anyways.

---

i dont have stg3 pcm >_<

no one knows someone that have stg3 and hptuners that can get together and check it out?

Sorry, I don't know anyone with stg3, just 2.

Pulling tune and looking at it wont solve any problems. Promise. I contacted Bill about this (attached a S3 file AND S2 file for his team to compare) and here is what he had to say:

Quote:

---

Originally Posted by [email protected]

Defintely don't have the engineering time for this anytime soon but I'll
have them add it to their to do list.

---

I don't know if this will help anyone or not... but a buddy of mine is a software engineer, and is likes to tinker with ECU calibrations (usually on Denso ECU's).
If anyone wants to post up a few Stage 3 calibration reads (from various years) I can probably get him to take a look, and try to get a solution for some of you.

Edit:
Just got off the phone with him.
He'd need the following stock and Stage 3 files (I can provide the stock files);
- 05 CSS
- 06-07 CSS
- 04 IRL
- 05 IRL
- 06-07 IRL

so hptuners cant tune a stg3 at this time.

Quote:

---

Originally Posted by omega_5

I can probably get him to take a look, and try to get a solution for some of you.

---

To clarify this; his intentions at this point in time, are convert a Stage 3 file into a file with an HPT license ready VIN, and to possibly unlock the AC algorithm.
I've already got him started looking though the stock file... so hopefully once we have an S3 file to compare to, it won't be too long.