Hello
I AM A BEGINNER IN AUTOMOTIVE PROGRAMMING WHEN I TRY TO ADJUST YUKON 2007 FANS USING HP TUNERS
I don't see settings to adjust the speed of the fans
I hope who has the experience to help me solve this problem
The image is placed in the attachments
and thank you
That vehicle probably doesn't have fan speed other than using two fans in series for low (6v per fan) or in parallel for high. What are you actually trying to accomplish?
HelloQuote:
Originally Posted by gtstorey
I'm trying to set the fans to work ahead of time so that the temperature doesn't rise
And thank you for the quick reply
THe way I think it works on this one is you set the (desired % vs ECT) for a higher percentage at a lower temperature. This will then be used by (State vs Desired %) which will then be used by (Output control vs State.). If you put in 100% at the temp you want the fans full speed in the first table, I think that will accomplish what you want it to. It's hard for me to say for sure without seeing all of the settings in those tables.
HelloQuote:
Originally Posted by gtstorey
I uploaded table images
Can I modify the settings from here to get a lower temperature
Is that what you mean, my friend?Attachment 144517
Missing the (Output control vs State.) table. But just try putting 97 in at whatever temp and up you want the fan to cut on full speed.
Quote:
Originally Posted by gtstorey
Thank you very much
I will try and if I face any difficulties I will contact you
Thanks my friend again
Attachment 144518