Does anyone have the off-the-shelf Roush calibration for a 2021+ F150?
Printable View
Does anyone have the off-the-shelf Roush calibration for a 2021+ F150?
The 2021+ seems to be illusive. There isn't even a stock read in the Repository. Much less a roush cal.Quote:
Originally Posted by M3T1
I've got a a 2024 F150 on order and I was looking for the stock 2023 file hoping it would be similar and I could get familiar with it, but I haven't found any files or anyone willing to share their stock read. My guess is, since you need the MG1 pcm service it will limit the number of peeps that actually have their files, and learn to tune these themselves.
Yup it does need the PCM service. I'm going to send mine out soon, and I'm happy to provide a stock read to the repo. Worst case, I'll have the dealer flash the Roush tune when I buy the blower kit, and then I'll read it and post that too.
I have a 23 with a roush supercharger and an unlocked pcm I can share the file. Could you share your stock 23 file?
Once I send my PCM out, I will surely post it. It's gonna be a few weeks because I can't afford to have the truck down currently.Quote:
Originally Posted by andyb756
Could you share the file by any chance? got a 23 Roush im about to doQuote:
Originally Posted by andyb756
I just sent my PCM out this week. I should have it back next week, and I will post the stock file. Can you share that Roush file for myself and the person who commented above who is about to do the blower as well? I will post my stock file as soon as I have my PCM back. Tracking says it is out for delivery at HP Tuners today.Quote:
Originally Posted by andyb756
Hey all. I just got my PCM back. Here is the stock calibration! The truck is a 2021 F-150 with a Coyote.
Attachment 144126
Don't expect the 24 F150s to be tunable anytime soon
Well my truck is a 2021, and I'm looking for a Roush calibration file still. I know someone else commented about a 2024, but that's not why I started this thread.Quote:
Originally Posted by Justinjor
ya my fault. I read the wrong reply.Quote:
Originally Posted by M3T1
I have a 21+ whipple base but not a roush.
Roush does not support any 24 F150 or Mustang.
But we do.
That would still be helpful because I could start from those speed density tables and dial it in from there. If you don't mind posting that file :)Quote:
Originally Posted by Justinjor
I'm not looking for help with a 24. My F-150 is a 2021.Quote:
Originally Posted by veeefour
well what im trying to tell you is you wont get any +23 roush files as they wont support anything over 23Quote:
Originally Posted by M3T1
That is not relevant to this thread. I'm looking for a 21-23 Roush file...Quote:
Originally Posted by veeefour
18 was different, 19 was different and 20 was but later 21 up was ALL the same up to 23 so good luck LOLQuote:
Originally Posted by M3T1
Right, and Roush sells a kit with a calibration for 21-23 models...Quote:
Originally Posted by veeefour