Desired vs. Actual Airflow ('14 Ram 1500)

Hi all,
I ran a log earlier, trying to figure out why my TB only opens to 76.1%. When looking at this, I also noticed that my desired airflow is always higher than the actual airflow. I've added the scan, any help or idea on the difference appreciated.

Thanks,

Attachment 108814

TB has a 5v sensor. 5v x 76.1% = 3.8v which is the max commanded at WOT.
Desired airflow is usually a little higher than actual...if actual gets too high, PCM may close the TB on you and who wants that right?
So all is good...

Quote:

---

Originally Posted by Hemituna

TB has a 5v sensor. 5v x 76.1% = 3.8v which is the max commanded at WOT.
Desired airflow is usually a little higher than actual...if actual gets too high, PCM may close the TB on you and who wants that right?
So all is good...

---

Thank you sir, much appreciated.