It's possible id say; however, I am not familiar with the 5 to 3 pin conversion. I would at least check the wiring connectors to make sure there are...
it?s just a return style regulator. 1 line in, 1 line to the rail, 1 line back to the tank. It can be set up for boost reference but there?s no boost...
Searching '4l80E' and 'segment swap' will give you lots of stuff to look at. The settings you can see and make changes to in the HPT Editor is about...
If it still has the original 2002 L59/'Z' fuel rails & regulator, your fuel pressure should be 51 PSI KOEO, all the data in the spreadsheet is for 58...
2011 Raptor 6.2 with Procharger D1SC head unit, off brand 60 lbs injectors. Currently dyno tuned on HP Tuners by a local shop, runs ok but I swapped...
i will have to try later when im off work. but is there something i have to change in the settings so not throw a cam sensor code i have a brand new...
You two risible clowns if your reading comprehension was as good as you think your tuning capabilities are , you'd understand why you're both wrong....
So the bouncing pressure isn't a glitch exactly per say. Its a flow problem. Think I said that a while back on a couple, but good to know it could be...